Member? - Login so you can access all the Guild has to offer!

NOVEMBER MONTHLY MEETING

Helen Bailey

Helen Bailey is a woodturner from Newcastle Upon Tyne in the North East of England.  Her work has been featured both in American Woodturner magazine (AAW) and the World of Woodturning website. Helen believes the quality seen in her work is down to meticulous planning, from the first design which she sketches out to the symmetry of the shapes. She is well known for her pierced pieces. Helen’s work is sought after by individuals and collectors all over the world.

Helen’s website:  https://www.helenbaileywoodturning.com/  

Portfolio:  https://www.helenbaileywoodturning.com/index.php/portfolio  

Register now for her classes at the OVWG Learning Center:

Helen Bailey - Decorated Box: 11/16/2025

Helen Bailey - Natural Edge Goblet: 11/17/2025

OVWG Turning 2025 Symposium

Thank You for Making Turning 2025 a Success!

What an incredible few days it was at the Turning 2025 Symposium! On behalf of the Ohio Valley Woodturners Guild and the entire symposium team, we want to express our deepest gratitude to every participant, demonstrator, volunteer, and supporter who made this gathering possible.

See you at Turning 2027!

Monthly Meeting Highlights

Show & Tell Photos

SAVE THE DATES

Basic Platters

Bob Henrickson demonstrated the basics of platter turning. Methods of mounting on the lathe for turning the face and finishing the base were reviewed for members to apply on their work piece. Design options were discussed to provide opportunities for various types of later embellishment.

Peppermills

KC Kendall demonstrated how to make a peppermill from layout, shaping, drilling and assembly.

Cross Drill Ornaments with Inlays

As an intermediate class, we learned how to make a Christmas ornament using a cross-drill technique and advanced spindle turning skills. After cross-drilling a hardwood cube, the cube was turned to created a globe. Laminates (snowflakes and dog paws) were then inlayed into the cube. A cap and finial were turned to complete the ornament.

Bird House Ornaments

As the holiday season approaches, we found ourselves looking for special gifts for special people. For woodturners, small gifts that will have special meaning for others are well within reach. With a little imagination and the use of wood scraps, the class made birdhouse ornaments that relatives and friends will treasure for years to come.

Demonstrator Class: Winged Bowls

Following his demonstration at the October monthly meeting, national woodturner Jamie Donaldson guided class participants through the process of making their own Winged Square Turning and Winged Bowl. He covered the process of sharpening the tools as well.

Segmented Vessel Week

It was segmented vessel week at OVWG in August.  Jess Parrett led a two-part hands-on class that provided techniques for creating segments using a table saw sled, gluing segments into rings, and gluing rings on the lathe to create a rough vessel blank to finish at home.  Dan Gingerich, John Peters, and Terry Elfers provided instructional support and shared various techniques in making segmented pieces.

Offset Plate:

Bob Henrickson led the group in turning a different sort of plate by creating a plate using both offsets and tilts to produce a striking effect. The domed center provided a focal point for embellishment. Using a jam chuck, the back side of the platter was shaped into an ‘ogee’ curve. 

Cheese Platter:

KC Kendall provided the ingredients to create a cheese platter with a marble insert.  A tasty tip to share - repurpose a mortise.  A mortise on the top side is used to finish the bottom side of the platter.  If the marble insert in the center is set up to be removable, the mortise can also be used to hold a similar sized bowl for chip dip.

Introduction to Woodturning and the OVWG Learning Center

The latest group of new members attended the free monthly orientation to the Ohio Valley Woodturners Guild and our Learning Center. They were acquainted with a brief history of the OVWG that started back in 1988 and how we've grown as a friendly group of people who love to turn wood. The operation of the Learning Center was reviewed and how this great resource can help the journey of learning to turn wood and finding out what kinds of things you can make. 

Safety is a high priority for the OVWG in all of our activities. The parts of the lathe were reviewed and how to be safe when working on the lathe, as well as use of other tools in the workshop. An introduction to sharpening was provided as well.

Attendees used the lathes for spindle turning as a hands on introduction to woodturning by making a bead & cove stick, since beads and coves are the key design elements of many things around us every day. 

Embellishment Tools & Techniques

As an intermediate class, attendees observed the use of a variety of embellishment tools and the associated turning techniques for each, and was then able to try each out on the lathe. Demonstrated tools included the following:

• Point Tool
• Knurling Tool
• Chatter Tool
• Spiraling Tool
• Beading Tool
• Teardrop Tool
• Elf Tool

Intermediate Skills: Jam Chucks

In the July Intermediate Skill Building session, techniques using jam chucks to turn and shape round objects were demonstrated. Attendees created a jam chuck to hold a round work piece in place for turning and repositioning as needed to create a desired shape.

Intermediate Skills: Ball-and-Cup

It was time to have fun making a Ball-and-Cup toy in Bev Connelly’s Skill Building Session for Intermediate members.  In a round about way, the session started with making a sphere and then designing a cup to fit the sphere - all from the same workpiece blank.  Techniques included sphere making, hollowing with a Forster bit, caliper measure, and creating pieces that fit inside another. With Bev and Mark’s expert guidance in efficiently turning the workpieces, the biggest challenge was catching the ball in the cup.